Pacemaker Twin 2.5" Performance Cat-Back Exhaust System for HSV VF Gen-F Maloo Ute 6.2L LS3 V8 2013–2015 - PP5381-09
SKU: 90549898188

Pacemaker Twin 2.5" Performance Cat-Back Exhaust System for HSV VF Gen-F Maloo Ute 6.2L LS3 V8 2013–2015 - PP5381-09

Sale price$987.82 Regular price$1097.58
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Pacemaker Twin 2.5" Performance Cat-Back Exhaust System for HSV VF Gen-F Maloo Ute 6.2L LS3 V8 2013–2015 - PP5381-09Pacemaker Performance Twin 2. 5" Cat Back Exhaust System for HSV VF Gen F Maloo Utility (6. 2L LS3 V8) PP5381 09 Maximize airflow efficiency, accelerate downstream gas velocity, and unlock a deep, commanding local muscle car roar from your high performance powerplant with the Pacemaker Sport Systems complete twin 2. 5 inch performance cat back exhaust solution. Custom engineered specifically to handle high gas volumes and optimize torque tracking on

Pacemaker Performance Twin 2.5" Cat-Back Exhaust System for HSV VF Gen-F Maloo Utility (6.2L LS3 V8) - PP5381-09

Maximize airflow efficiency, accelerate downstream gas velocity, and unlock a deep, commanding local muscle car roar from your high-performance powerplant with the Pacemaker Sport Systems complete twin 2.5-inch performance cat-back exhaust solution. Custom-engineered specifically to handle high gas volumes and optimize torque tracking on the elite HSV Gen IV 6.2L LS3 V8 utility platforms, this premium setup is precisely shaped to map the utility floor pan lines, flat cargo load beds, and rear multi-link independent suspension constraints unique to the VF series HSV commercial architecture. Designed explicitly to interface flawlessly with your vehicle's factory fixed exhaust tips integrated into the rear bumper fascia, this premium kit delivers seamless aesthetic alignment. By replacing your stock, restrictive factory plumbing downstream of the catalytic converters with smooth, mandrel-bent twin 2.5" plumbing, it rapidly clears spent exhaust gases to completely eliminate power-robbing backpressure under heavy acceleration. As Australia’s premium exhaust innovator, Pacemaker pairs this free-flowing layout with patented V-Tex technology and signature double-skinned mufflers, delivering an uncompromised, thumping V8 rumble outside under throttle while actively engineering out harsh interior cabin boom or open cargo tray resonance to preserve a completely clean, drone-free highway cruising experience.

Note: Fits HSV VF Gen-F Maloo Ute models built from May 2013 to September 2015 equipped with the Gen IV 6.2L LS3 V8 engine layout and factory fixed bumper exhaust tips; does not fit Sedan, Sportwagon, or long-wheelbase Grange platforms due to structural chassis routing, intermediate pipe lengths, and rear hanger location differences.

Features:

Precision-manufactured in Australia to deliver a premium flow upgrade, maximum structural longevity under intense heat, and a refined performance acoustic profile for the iconic HSV utility platform.

  • True Performance Cat-Back Layout: Comprehensive high-efficiency performance line engineered to bolt up securely downstream of the factory or premium aftermarket catalytic converter paths.
  • Factory Fixed Tip Integration: Specific tailpipe outlets engineered explicitly to slide directly into and align perfectly with the standard fixed chrome exhaust tip bezels built into the factory rear HSV Maloo bumper bar.
  • Utility Specific Clearance: Custom-tailored plumbing path configured to route cleanly beneath flat cargo bed structures, drop-sides, and vehicle-specific commercial chassis paths.
  • Premium Materials: Constructed completely from durable, heavy-gauge Exhaust Grade 409 Stainless Steel to ensure superior structural longevity and resistance to thermal fatigue.
  • Mandrel Bent Tubing: Rigid twin 2.5" (63.5mm) pipe structure guarantees a smooth, uniform internal diameter through all bends to eliminate gas turbulence and prevent restriction.
  • V-Tex Technology: Advanced internal patented anti-drone configuration filters out harsh, low-frequency cabin resonance typical of open utility cabs without restricting gas velocity footprints.
  • Signature Mufflers: Heavy-duty double-skinned 409 Stainless Steel rear mufflers offer premium outer case reinforcement, completely preventing internal acoustic packing blowout under heavy thermal load constraints.
  • Direct Bolt-On Layout: Engineered as a comprehensive, vehicle-specific full bolt-up kit that mounts directly onto existing factory rubber hanger positions—no custom fabrication required.
Product Specifications for PP5381-09
Brand Pacemaker Sport Systems Part # / SKU PP5381-09
Product Type Performance Cat-Back Exhaust System Material 409 Grade Stainless Steel
System Piping Size Twin 2.5" (63.5mm) Mandrel-Bent System Acoustic Layout Signature Double-Skinned Mufflers & V-Tex
Engine Compatibility HSV Gen IV 6.2L LS3 V8 Body Configuration Utility (Ute) Only

Vehicle Applications:

Make Model From To Body Series Engine Variant Drivetrain
HSV (HOLDEN SPECIAL VEHICLES) UTILITY
HSV Maloo Ute 05/2013 09/2015 Utility (Ute) Only VF Series (Gen-F Phase 1) 6.2L Gen IV LS3 V8 Maloo / Maloo R8 layouts RWD

Important Fitment Notes:

  • Specifically engineered to fit HSV VF Gen-F Maloo Ute variants powered by the 6.2L Gen IV LS3 V8 engine layout built from May 2013 to September 2015.
  • Bumper Tip Requirement Configuration: This kit is specifically tailored for early VF Gen-F utility builds that feature factory fixed rear chrome exhaust outlets integrated into the rear bumper fascia. The tailpipes feature an open-ended configuration designed to seat cleanly within those factory bezels without heat mapping or alignment issues.
  • Utility Specific Routing Geometry: Due to underbody chassis cavity variations, extended wheelbase specifications, and alternative rear hanger brackets intended to clear tray architectures, this layout features distinct intermediate lengths. It will not adapt correctly to Sedan, Sportwagon, or long-wheelbase Grange platforms.
  • Direct bolt-on architecture interfaces seamlessly with original vehicle-specific rubber hanger brackets downstream of the factory or aftermarket catalytic converter zones. No custom fabrication or welding mapping is required.
  • Professional automotive performance technician installation is highly recommended to guarantee ideal ground clearance, verify strict intermediate section clearances, and secure completely gas-tight structural seals.
Warranty Information
Product Warranty Period
Pacemaker Sports Exhaust Systems Five (5) years.

Payment & Security:
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 90549898188

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 337 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Susu
Birmingham, US
★★★★★ 5
It’s a great value
Color: Black
My son is very happy with this iPad case. It fits perfectly, provides great protection against scratches and minor drops, and feels durable and well-made. The stand feature is very convenient for watching videos, reading, or working. It also has a sleek design and doesn’t add much extra weight to the device.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 8, 2026
W
Verified Purchase
William Kasimer
Draper, US
★★★★★ 5
Great case for iPad
Color: Black
I saw a similar Zugu case for my iPad and almost bought it, but it looked like my iPad might not fit, so I hunted and found this VIKESI case, which cost about 1/3 as much as the Zugu. It's close to perfect. My iPad fits perfectly, and the almost infinite number of angles that it permits, along with magnets to hold it in place make it ideal for working on a desk or in my lap. The only minor downside is that it's on the heavy side, probably because of the magnets. But unless you're travelling with it (I've switched to a small Fire tablet for travel), that won't be an issue. Highly recommended.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2026
S
Verified Purchase
S. Sirico
Houston, US
★★★★★ 5
ipad cover
Color: Rose
love it. light but durable. like how it can be hinged from either side horizontally. no can do vertically. great bargain and colorful, got pink, the stylus holders perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
L
Verified Purchase
L Shavonne
Lowell, US
★★★★★ 5
The magnet does not stick to the refrigerator as advertised.. UPDATE ( I love it and it does stick)
Color: Pink
Although it is a nice case, it seems sturdy and it is very beautiful, my main reason for purchasewas I loved the fact that it sticked to the refrigerator. I was very disappointed to see that it does not. It’s too heavy, and it immediately begins to slide. That is the reason why I could not give it more than three stars. It disappointed me enough to where I’m really considering returning the item. UPDATE: I found out how to make a stick to the refrigerator and I absolutely love it! I changed my review and my stars! I’m really happy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2026
S
Verified Purchase
Steve Chavez
Belleville, US
★★★★★ 4
Great Protection, Great Fit — One Small Flaw
Color: Forest Green
I really love this case. It protects the iPad well, fits perfectly, and is still easy to put on and take off. The pencil holder is especially nice — it keeps the Pencil secure without feeling loose or flimsy. My only complaint is that some USB‑A to USB‑C adapters don’t have enough clearance to plug in. The edge of the case blocks certain adapters from seating properly. It’s the only issue I’ve run into, but it’s worth mentioning if you rely on chunkier adapters. Aside from that, this is an excellent case and one I’m happy to use every day.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2026

recommand products