Moza Racing Dash Board R16, R21Moza Racing Dashboard Compatible with R16, R21 Introduction Upgrade your sim racing setup with the Moza Racing Dashboard, compatible with the R16 and R21 wheelbases. This high quality dashboard features a sleek design and robust materials, ensuring a premium racing experience. Compatibility PC: Requires 1 USB connection (includes 1 6ft USB cable) Plug and Play: No additional software needed Key Features Premium Construction Material: 6mm Real Carbon

Moza Racing Dashboard - Compatible with R16, R21

Introduction

Upgrade your sim racing setup with the Moza Racing Dashboard, compatible with the R16 and R21 wheelbases. This high-quality dashboard features a sleek design and robust materials, ensuring a premium racing experience.

Compatibility

• PC: Requires 1 USB connection (includes 1 - 6ft USB cable)
• Plug and Play: No additional software needed

Key Features

Premium Construction

• Material: 6mm Real Carbon Fiber Matte Twill Weave Plate
• Mounting: Includes all necessary mounting hardware

Comprehensive Controls

• Left Side:

  • 1 On/Off Latching Toggle with Guard (Programmed as momentary)
  • 1 Apex Branded Engine Start Button
  • 3 MOM OFF MOM Toggles with black boot
  • 5 12mm Momentary Push Buttons
    • Multi-switch option adds a 7-way multi-switch to replace the center push button (Up, Down, Left, Right, Push, Encoder Left & Right)

• Right Side:

  • 8 12mm Momentary Push Buttons
  • 4 CTS Encoders
  • 1 Billet Aluminum Brake Bias Knob (can be used for other settings)

Important Installation Notes

Compatibility Confirmation

Please confirm that this will fit your setup. The dash has enclosures and cables that come out of the rear, which may not fit certain mounts and may need spacers to fit properly. If unsure, please contact us.

EMI Concerns

Some customers have reported EMI from Fanatec wheelbases. If you are experiencing button press issues, you will need to ground the dash to the wheelbase with the provided wire.

Grounding Instructions

1. Step 1: Remove the rear enclosure plate with a 2mm Allen Key.
2. Step 2: Strip about 1 inch off the wire, route it to the wheelbase, and wrap it around the M6 bolt between the rear of the dash and the front of the wheelbase as pictured below.
3. Step 3: Mount the dash as normal with the wire between the carbon plate and the wheelbase.

If you need assistance, please contact support.