SUNLU FilaDryer SP2 3D Printer Filament Dryer and Storage Box

SUNLU FilaDryer SP2 3D Printer Filament Dryer and Storage BoxFeatures 2 in 1 Design: Use it as a filament dryer and a stackable storage box. Space Efficient: Stack multiple storage boxes (up to 3) for enhanced space utilization. Rapid Heating: Reaches 70C in just 15 minutes, drying filaments efficiently. Adjustable temperature 35 70C to suit different filament types. Strong Sealing: Silicone seals on both ends ensure excellent insulation and maintain low humidity (average 25% at 50% ambient humidity). Large

Features

• 2-in-1 Design: Use it as a filament dryer and a stackable storage box.

• Space-Efficient: Stack multiple storage boxes (up to 3) for enhanced space utilization.

• Rapid Heating: Reaches 70°C in just 15 minutes, drying filaments efficiently. Adjustable temperature 35-70°C to suit different filament types.
  

• Strong Sealing: Silicone seals on both ends ensure excellent insulation and maintain low humidity (average 25% at 50% ambient humidity).

• Large Capacity: Fits spools from 0.25kg to 3kg, and up to two 1kg spools. Supports spools up to 250mm in diameter and 153mm in width.

• Universal Compatibility: Works with both 1.75mm and 2.85mm filament diameters. Works with both plastic and paper spool filaments.

• User-Friendly: Features an integrated carrying handle, and six different filament outlet holes.

• Built-in Hygrometer: Real-time observation of internal humidity changes
  

• Triple Safety Design: Foolproof heating with 200W PTC fan heating, secondary temperature protection switch, and software intelligent temperature control.

Specifications

Product Name: SUNLU Filament Dryer SP2 / Storage Box Set
Product Dimentsions: 278mm×208mm×396mm(LWH)
Internal Dimentsions: 265mm×193mm×274mm(LWH)
Package Size: 337mm×263mm×380mm(LWH)
N.W.: FilaDryer SP2 Set: 3.6KG, Storage Box Set: 5.0KG
G.W.: FilaDryer SP2 Set: 4.1KG, Storage Box Set: 5.5KG
Operating Environment: Temperature: 10°C-35°C, Relative Humidity: ≤95%
Compatible Filament Diameters: Φ1.75mm/Φ2.85mm
Maximum Spool Size: Φ250mm×153mm(1kg×2 or 2kg×1 or 3kg×1)
Work Temperature Range: 35°C-70°C (PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC etc.)
Humidity Display Range: Refer to the Hygrometer:10%-90%
Time Setting Range: 0-99h
Power Input Specifications: AC 110V 60Hz 0r AC 220V 50Hz
Maximum Operating Current: 2.2A@230V, 4.2A@120V
Maximum Working Power: 250w
Stand by Power: ≤1W
Plug: SG/UK

Packing List

• FilaDryer SP2 Set: Storage Box *1, Heating Base *1, Hygrometer *1, Desiccant *1, Desiccant Box *1, Power Cable *1, Spool Roller *1, Air lock *2, PTFE Tube 8cm *2, PTFE Tube 1m *2, User Manual *1
• Storage Box Set: Storage Box *1, PLA+2.0 Black *2, Hygrometer *1, Desiccant *1, Desiccant Box *1, Spool Roller *1, Air lock *2, PTFE Tube 8cm *2, PTFE Tube 1m *2, User Manual *1