Jaypro Basketball System - Gooseneck (4-1/2 in. Pole with 4 ft. Offset) - 54 in. Aluminum Fan Board - Playground Goal
SKU: 48167600190

Jaypro Basketball System - Gooseneck (4-1/2 in. Pole with 4 ft. Offset) - 54 in. Aluminum Fan Board - Playground Goal

$1057.50 $1175.00
Save 10%
No.2 Bestseller on lesnenettesduvin.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Jaypro Basketball System - Gooseneck (4-1/2 in. Pole with 4 ft. Offset) - 54 in. Aluminum Fan Board - Playground GoalJaypro Sports 996 FABT UG Gooseneck Basketball System with 54 Inch Aluminum Fan Backboard Building a reliable outdoor court requires equipment that can withstand both heavy use and the elements. The Jaypro Sports 996 FABT UG is a heavy duty gooseneck basketball system specifically engineered for high traffic environments like schoolyards and community parks. At its core is a 4 1 2 inch diameter Schedule 40 steel pole, which provides a rock solid

Jaypro Sports 996-FABT-UG Gooseneck Basketball System with 54-Inch Aluminum Fan Backboard

Building a reliable outdoor court requires equipment that can withstand both heavy use and the elements. The Jaypro Sports 996-FABT-UG is a heavy-duty gooseneck basketball system specifically engineered for high-traffic environments like schoolyards and community parks. At its core is a 4-1/2 inch diameter Schedule 40 steel pole, which provides a rock-solid foundation for competitive play. The gooseneck design features a generous 48-inch offset, creating a "Play Safe" area that keeps players from colliding with the support post during aggressive drives to the hoop or under-the-rim action.

The system includes a 54-inch by 36-inch aluminum fan backboard, model ALB-24BT, which offers a classic look and exceptional resistance to rust and corrosion. Paired with the UBG-500 Playground Goal, this setup delivers consistent rebound performance and long-term stability. Installation is permanent and secure, with the upright burying 48 inches into the ground to ensure the unit remains upright through years of intense use. While the standard finish is galvanized for maximum weather protection, powder coating options are available to match specific facility aesthetics. This system is a practical investment for any facility manager looking for a low-maintenance, high-durability hoop that prioritizes player safety without sacrificing professional playability.

Specs at a Glance:

  • Pole: 4-1/2" diameter Schedule 40 steel gooseneck upright
  • Offset: 48-inch extension for an enhanced "Play Safe" area
  • Backboard: 54" x 36" Aluminum Fan Backboard (ALB-24BT)
  • Goal: Heavy-duty UBG-500 Playground Goal
  • Installation: In-ground mount requiring a 48-inch burial depth
  • Finish: Standard galvanized finish with optional powder coating available
  • Warranty: 3-year limited warranty on post, board, and goal; 1-year on net
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 48167600190

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 1484 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Amazon Customer
Charlottesville, US
★★★★★ 5
Well designed, secure hold
Style: MagSafe Car Phone Holder, Style: MagSafe Car Phone Holder
This Tesla screen phone mount feels well designed and has a strong MagSafe magnet to hold your phone. It is meant for the newer generation of Teslas with the screen that sits out from the instrument panel. It’s sits on the corner and has padding to keep it from scratching the screen. The size of the grippers keeps them right at the edge of the bevel so it doesn’t block any portion of the screen. They are easily tightened with a rotating dial that doesn’t slip. The MagSafe magnet can be positioned in a variety of positions. The kit comes with an adhesive metal ring in case your phone or case isn’t MagSafe compatible. Unfortunately, it didn’t come with any instructions, but it was easy enough to figure out.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 23, 2025
W
Wonderful Reviews
Lowell, US
★★★★★ 4
Mount your MagSafe compatible phone to the Tesla monitor
Style: MagSafe Car Phone Holder
The Tesla MagSafe monitor mount fits the screen of a Model 3 perfectly. It has a strong magnet and when you attach it to the monitor and tighten the wheels this mount stays put. I can now have my phone docked next to the monitor in front of the steering wheel, which really helps me unlock the phone when I need to access things like my phone's calendar or emails. I can also use the phone as a music switching interface when it's connected to the car via bluetooth. The design of the mount is very simple, it has two cushioned clamps, I never felt like I was compressing the clamps too hard that it'll crack the screen but I just adjusted it enough so it won't fall down with the weight of the phone on the mount. The magnet of the mount is very strong and as long as your phone supports MagSafe docking it will not have a risk of falling when you drive even over bumps. The arm of the mount is adjustable so you can place it at the appropriate angle that you like.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 29, 2025
B
BL
Birmingham, US
★★★★★ 5
Good phone mount
Style: MagSafe Car Phone Holder, Style: MagSafe Car Phone Holder
So far I’m very happy with the phone mount for my Tesla Model 3. It installed very easy, feels secure, the magnetic ring holds my iPhone really well. My last mount had an issue with staying in place, the phone would often tilt when going over bumps but this one seems solid. There were no installation instructions but it was a no brainer to install. Like most mounts the give you a separate metal ring you can attach to the back of your phone if your phone or case isn’t MagSafe.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 22, 2025
J
Jim
Grantham, US
★★★★★ 4
Made of alloy and mostly plastic
Style: MagSafe Car Phone Holder, Style: MagSafe Car Phone Holder
This is a fairly decent MagSafe mount that attaches cleanly to an LCD car display. It works and looks good on my Tesla Model 3. The only part that is metal is the bracket but the rest seems to be made from a metallic looking plastic. I do like that the inside of the clamps can be adjusted independently and there’s a layer of silicone padding to protect the screen. I was able to make it pretty tight with no movement at all. It only works well on a “naked” phone or a cover that has MagSafe ring built in. I have a super thin case and it seems to hold pretty well so far but I do wish the magnets were a bit stronger. The good thing is that it uses a standard ball joint so I have other types of mounts that could easily fit in place of the MagSafe version. The only other thing that I think detracts from the overall “clean look” is the screened text on the clamp that simply says “Screen Holder”. It would have been better not there.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 24, 2025
K
Verified Purchase
K.G.
Chelsea, US
★★★★★ 5
EXCELLENT Product for using with the dash mount BUT not so good for all cars with the vent mount.
This is a great product for wireless phones worked perfectly for my SG S21 the mount is really good sturdy flexible and firm if done right. BUT the vent jack plug is short for my Camry 2018 doesn't hold the phone firmly. It keeps wobbling when driving. So if you're looking for using just the vent holder make sure your car has a short AC flap so it can mount the plug firmly hold the phone properly. The phone holder is amazing it works really good just the way it is shown in the description. So guys first check the flap size of your cars AC vent must be short if you're looking to use the Vent plug holder. But if you're going to use it only with the dash mount its fantastic and holds the phone really firm and good. I really love this product and highly recommend to buy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 12, 2025

recommand products

AgSmart Pick Up Drive Sprocket for John Deere Balers AFH205832
37.99
AgSmart Rotary Cutter Blade - CW Rotation, 18-3/4" for Hardee C1257
58.99
AgSmart Rotary Cutter Blade - CCW Rotation, 23" for Land Pride 820-169C
63.99
AgSmart Tail Wheel Hub for Land Pride 312-020D
16.99
AgSmart Cam Follower Bearing for Case IH, International & New Holland Balers 40714
22.99