SKU: 33767315659

Treal Performance 2017-2022 Can-Am X3 Trail Side Exit Exhaust System

Sale price$539.10 Regular price$599.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Treal Performance 2017-2022 Can-Am X3 Trail Side Exit Exhaust SystemFits The Following Models: CanAm Maverick X3 17 22 All models including XDS, XRS, XRC, XMR 2 Seat and 4 Seat P N: TRP X3 QTSEE Features Full 3 Inch Turbo Back Exhaust Horsepower Gain up to 10hp & 7hp at Peak Power Over 25lbs lighter than Stock Exhaust System Reduces heat buildup in engine compartment High End Quality Dyno proven performance 2 o2 Sensor Bungs for Option to Run Aftermarket Wideband Gauge Food Grade Stainless Steel 3 Inch V band Flange

Fits The Following Models:

  • CanAm Maverick X3 17-22
  • All models including XDS, XRS, XRC, XMR
  • 2 Seat and 4 Seat

P/N: TRP-X3-QTSEE

 Features

  • Full 3 Inch Turbo Back Exhaust

  • Horsepower Gain up to 10hp & 7hp at Peak Power

  • Over 25lbs lighter than Stock Exhaust System

  • Reduces heat buildup in engine compartment

  • High End Quality

  • Dyno proven performance

  • 2 o2 Sensor Bungs for Option to Run Aftermarket Wideband Gauge

  • Food Grade Stainless Steel

  • 3 Inch V-band Flange Assembly

  • Straight through full flow Large Resonator & Large Muffler

  • 100% TIG Welded

  • Runs cooler than factory exhaust

  • Great Deep Sound and Flow Without Being Obnoxiously Loud

  • Light Weight Design

  • Limited 5-year warranty

  • Made in the USA

  • Comes with all Brackets, Mounts, Hardware, and Instructions Needed for Install.

Treal Performance Quiet Trail Turbo Back Side Exit Exhaust System for the Maverick X3 will give you the best performance without being too loud. This exhaust doesn’t not have have any of the “drone” that other exhaust may have. This exhaust is intended for the people that are looking for a different look than the stock center exit style exhaust. The exhaust also works great for custom cages with a rear mounted spare tire setup or rear radiator as the exhaust sits about 3 to 4 inches lower that our Sport exhaust or Quiet Trail with the standard stock location exhaust exit. This side exit Trail exhaust uses the same Muffler and resonator as the standard Quiet Trail exhaust so it will be the same level of sound for do a lot of trail riding, that would like a exhaust for the performance and sports car sound but don’t want any loud drone and leaving their ears ringing after hours of riding. You can comfortably ride with this exhaust and still talk to your other riders without having issues hearing due to the exhaust. If you would like it to be a little bit louder with more turbo whistle sound and sound more like our popular original Sport exhaust then buying this exhaust without the resonator in the front section of the exhaust is the option for you!

The Treal Performance full 3-inch exhaust system will outperform any other exhaust. It will outperform by a notable margin any other exhaust on the low end to mid-range. It's 3-inch full flow exhaust will let the turbo spool up faster, which will increase low end power and torque! We have seen gains of over 10hp to the wheels down low to mid range and 7hp gain at peak power over stock! No other exhaust will make more bottom end torque and horsepower in a drag race launch or low-end pull. Unlike many other systems that are too loud or sound like an RZR, this one has that sports car sound with the performance growl you are looking for.

Treal Performance exhaust has a killer look to it! Very nice all stainless which exits out the driver side. this system is a top selection in on looks, performance, and sound. This exhaust can run the rear plastic cover after some trimming is down to the side where it exits or run without the cover and show off that beautiful exhaust. The level of sound is not loud like you may think a full 3 inch open exhaust system might would be.

Treal Performance has designed all their exhaust to be able to mix and match different front and rear sections. If you buy a Treal Performance exhaust and decide you want a different sound quieter or louder you can contact Treal Performance or one of their vendors to buy add on replacement sections that have or don't have a resonator or muffler.

CB 8/21/25

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 33767315659

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 1421 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
N
Verified Purchase
Nc
Carnegie, US
★★★★★ 4
Pretty good, take your time and install it well
Size: side table leg
Materials are pretty solid, but once assembled it’s not as sturdy as you would think it should be since the material itself was solid, i say give them a chance, everything out there that’s similar is way over priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
R
Verified Purchase
Roberta Mayes
San Leandro, US
★★★★★ 5
Heavy duty legs for table.
Size: side table leg
Perfect legs for a table I am having made. I have an cottonwood slice. It's heavy and needed something substantial. These are perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
R
R. Moheban
Lexington, US
★★★★★ 5
Robust pipe & fittings with a beautiful, smooth black finish
Size: side table leg
This set of pipe & fittings for use as low table legs is heavy duty and aesthetically pleasing. Especially when the pieces are handled, the tactile sensation is much nicer than with plumbing steel pipe because this product is beautifully finished smooth. The black pipes are quite smooth as well as the fittings. The pieces are all also pretty robust, though the wall thicknesses are less than in pipe for pressurized water systems. Of course that makes sense as this product does not need to hold fluid pressure. In my view they got the heaviness factor of this product just right; it's not as heavy or robust as black pipe used in natural gas supplies, but still robust and pretty heavy. Assembled, this product is absolutely stiff and unyielding for a solid table that could hold a man's weight easily. The feet utilize a brilliant scheme so that each foot can be independently adjusted for an uneven floor. Thus a level table on an uneven floor is easily accomplished. The feet simply extend the effective leg length by screwing counter-clockwise. To prevent any shifting at the threads adding some pipe compound or teflon tape may be advised. Even masking or duct tape might work as the idea is to just fill any gaps where male threads meet female threads. The four flanges at the tops of the legs provide a wide, solid surface for attaching the table top, with either hidden screws underneath or you could through-bolt a glass table top (provided you have the skill to drill glass!). I think this product would look great with a glass top. Assembly is quick and easy. The hardest part is drilling holes underneath the table top to accept screws. No pipe wrenches are needed as the pieces screw together by hand to an adequate tightness. If any doubt whether they are tightened enough have a strong person with grippy gloves finish. The "X" in the center attaches to the legs with a very clever machine screw system tightened with the included hex wrench. This is presumably because if tightened simply by screwing the fittings, the point of snugness would not likely be where the "T" fittings are exactly vertical. The maker has solved this problem so that you are assured that all legs will be in the perfect vertical position once everything is tight. The setup is also nice and rigid once tightened. This is a huge benefit of steel pipe projects; they are really solid. The black finish is clearly very durable, like a powder coat. It appears that it will provide excellent protection against rust. Coverage is complete; I found no dings or scratches anywhere on any piece. Overall this is a very well-designed product for function and aesthetics. Perfect for a beautifully renovated warehouse condo where an industrial vibe is desired in a rock-solid table that won't shift around. The smoothness of the pipe is top notch. I've used lots of pipe in projects, some of it actual water pipe and some decorative pipe such as this. I've never seen better quality decorative pipe as this maker put in the effort to finish it beautifully smooth. At currently $34.99 I find the price quite reasonable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
P
Verified Purchase
patricia
Phoenix, US
★★★★★ 3
the height is only 16"
Size: coffee table leg
The height is only 16". From the description it appears to be 24" wide and 24" high.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
C
CMC20
Carnegie, US
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025

recommand products