Carbon Fiber Nylon Filament 2.85mm 10kg

Carbon Fiber Nylon Filament 2.85mm 10kgCarbon Fiber ABS, PETG, PC PBT, and Nylon Proprietary Carbon Fiber fill on all Resins Added stiffness Improved dimensional stability Excellent surface finish Recommended Print Settings: CF PC PBT: Extruder: 250 260C. (Better layer bonding at higher temperatures) Bed: 90 100C Hardened Nozzle: 0. 4mm or larger (. 6mm recommended) Layer Height: Ideal layer height is 50 60% of nozzle diameter CF ABS: Extruder: 230 240C Bed: 110C Hardened Nozzle: 0. 4mm or

Carbon Fiber ABS, PETG, PC/PBT, and Nylon

• Proprietary Carbon Fiber fill on all Resins
• Added stiffness
• Improved dimensional stability
• Excellent surface finish

Recommended Print Settings:

CF PC/PBT:

• Extruder:  250-260°C.  (Better layer bonding at higher temperatures)
• Bed:  90 - 100°C
• Hardened Nozzle: 0.4mm or larger (.6mm recommended)
• Layer Height:  Ideal layer height is 50-60% of nozzle diameter

CF ABS: 

• Extruder:  230-240°C
• Bed:  110°C 
• Hardened Nozzle: 0.4mm or larger  (.6mm recommended)
• Layer Height:  Ideal layer height is 50-60% of nozzle diameter

CF PETG:

• Extruder:  240-250°C
• Bed:  90°C
• Hardened Nozzle: 0.4mm or larger  (.6mm recommended)
• Layer Height:  Ideal layer height is 50-60% of nozzle diameter

CF Nylon:

• Extruder:  240-260°C.  (Better layer bonding at higher temperatures)
• Bed:  90 - 100°C
• Hardened Nozzle: 0.4mm or larger  (.6mm recommended)
• Layer Height:  Ideal layer height is 50-60% of nozzle diameter
• Drying - Nylon will absorb more moisture than other resins when left exposed. Make sure to keep this filament in a dry location between uses.  If the filament does get wet, you can dry it out for 2-3 hours at 70-80°C

**We recommend using our Hardened Steel Nozzles if you are printing Carbon Fiber