Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
CHAUVET GigBAR 2 - 4-in-1 Multi-Effect Light2 x R G B LED Derbies 2 x Quad Color RGB+UV LED PARs 4 x White UV Strobe LEDs 1 x Red Green Laser Heads Are Adjustable & Interchangeable DMX or Standalone Operation Automated & Sound Activated Programs Master Slave Operation Supports Power and DMX Daisy Chaining Includes Remotes and Carry Cases Flood your stage in a variety of exciting lighting effects with the GigBAR 2 from CHAUVET . Mounted on a bar, this versatile system includes four individually
- 2 x R/G/B LED Derbies
- 2 x Quad-Color RGB+UV LED PARs
- 4 x White/UV Strobe LEDs
- 1 x Red/Green Laser
- Heads Are Adjustable & Interchangeable
- DMX or Standalone Operation
- Automated & Sound-Activated Programs
- Master/Slave Operation
- Supports Power and DMX Daisy-Chaining
- Includes Remotes and Carry Cases
Flood your stage in a variety of exciting lighting effects with the GigBAR 2 from CHAUVET . Mounted on a bar, this versatile system includes four individually adjustable and interchangeable heads�two R/G/B LED derby-effect lights and two color-mixing RGB + UV LED PARs�in addition to four white/UV multi-output strobe LEDs that create chases and slow-motion effects, and an adjustable red/green laser that scatters hundreds of bright dots and beams in all directions.
The GigBAR 2 allows for both standalone and DMX operation. For use without a DMX controller, there are two modes to choose from: sound-active and automatic. Link multiple GigBAR 2 units using the Master/Slave configuration to create coordinated lights shows without any DMX programming. The unit uses XLR 3-pin DMX input and output connectors and has three DMX channel modes (3, 11, or 23 channels), enabling various levels of control. Lastly, the fixture can be controlled either directly via its digital display or remotely using the IRC-6 infrared remote (included) or wireless foot switch (included).
In addition to DMX daisy-chaining, the GigBAR 2 supports power linking via its pass-through IEC input to Edison output, minimizing time spent on cable runs and finding power outlets. Plug a single power cable into the wall outlet and daisy-chain up to 8 units in a 120V environment, or up to 15 units in a 230V environment. All of the fixture's LEDs are rated at an average lifespan of 50,000 hours. The GigBAR 2 comes with a tripod for floor-level installation, mounting brackets for rigging it to a truss, and carry bags for both the fixtures and the tripod.
- Lighting
- Two derby-effect lights, with two red, two green, and two blue LEDs each
Two color-mixing quad-color LED PAR lights (RGB+UV)
One red/green laser fixture with rotating patterns
Four high-power white/UV LED strobe lights
- Control
- Three DMX channel modes: 3, 11, and 23 channels
Let the environment control the fixture in sound-active mode
Use master/slave configuration with other GigBAR 2 fixtures for a coordinated show
Run automatic shows with one of the built-in programs
The included IRC-6 wireless remote control and wireless footcontroller can be used in place of a DMX console
- Linking
- Data-link multiple fixtures via the XLR 3-pin DMX input and output connections
Power-link up to 8 fixtures at 120V, or up to 15 fixtures at 230V
| Light Sources | Derby Lights: 6 x single-color LEDs (2 red, 2 green, 2 blue); 6 W (1.7 A) PARs: 6 x quad-color RGB+UV LEDs; 3.5 W (1.1 A) Strobes: 4 x white/UV LEDs; 1.8 W (600 mA) Lasers: 1 x 532 nm 30 mW green diode; 1 x 650 nm 100 mW red diode (Class 3R) |
| Life Expectancy | LEDs: 50,000 hours |
| Beam and Field Angle | PARs: 13° / 24° Strobe: 8° / 18° |
| Coverage Angle | Laser: 93° Derby: 114° |
| Strobe Rate | Strobe: 0-18 Hz |
| Illuminance | PARs: 1,205 lux at 6.6' (2 m) per head Strobe: 86 lux at 6.6' (2 m) per zone |
| DMX Connectors | Input: XLR 3-pin Output: XLR 3-pin |
| DMX Channel Modes | 3 x Modes: 3, 11, or 23 channels |
| Wireless Control | Footswitch (included) IRC-6 Remote (included) |
| Footswitch | Operating Frequency: 433 MHz Range: 100' (30.5 m) Battery: 12 V A23 |
| Input Voltage | 100-240 VAC, 50/60 Hz (auto-ranging) |
| Power Connection Type | Input: IEC Output: Edison Power Cord Plug: Edison |
| Power Linking | 120 V, 60 Hz: 8 units maximum 230 V, 50 Hz: 15 units maximum |
| Power Consumption | 120 V, 60 Hz: 68 W, 1 A 230 V, 50 Hz: 64 W, 0.5 A |
| Operating Temperature | Maximum: 95°F (35°C) |
| Cooling System | Fan-cooled and convection |
| Certifications | Classified per EN/IEC 60825-1:2007 Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 Approvals: CE, FDA, FCC |
| Dimensions | GigBAR 2: 46.7 x 4.3 x 15.2" (1185 x 110 x 387 mm) Tripod Minimum Height: 4.8' (1.5 m) Tripod Maximum Height: 8.3' (2.5 m) Leg Footprint: 3.9' (1.2 m) Tripod Mount: 1.5" (37.4 mm) |
| Weight | 14.4 lb (6.6 kg) |
| Packaging Info | |
|---|---|
| Package Weight | 40.5 lb |
| Box Dimensions (LxWxH) | 57.0 x 23.5 x 6.0" |
- Power Cord
- 2 x L-Brackets
- Wireless Footswitch with Battery
- IRC-6 Wireless Remote
- Gear Bag
- Tripod Carry Bag
- Tripod Stand
- Limited 2-Year Warranty
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy