10.75 X 17 RMP™
SKU: 4121121804

10.75 X 17 RMP™

Sale price$54.00 Regular price$60.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

10.75 X 17 RMP™RMP Tactical Backpack Insert Rigid Panel stays upright in backpack Attach MOLLE style pouches to organize your gear Customize with Adhesive Backed Loop to accept Velcro Hook Pouches Use GMT backer plates to hard mount a variety of accessories Universal fit, check compatibility chart for sizing 0. 25" holes on edge for mounting with screws 1" slots for attaching handles or mounting with 1" webbing The RMP was designed for modular organization on a


 


RMP Tactical Backpack Insert 


- Rigid Panel stays upright in backpack

- Attach MOLLE style pouches to organize your gear

- Customize with Adhesive Backed Loop to accept Velcro Hook Pouches

- Use GMT backer plates to hard mount a variety of accessories

- Universal fit, check compatibility chart for sizing

- 0.25" holes on edge for mounting with screws

- 1" slots for attaching handles or mounting with 1" webbing 

    The RMP was designed for modular organization on a rigid platform that allows vertical organization within a backpack. Quick access to your gear is enhanced by the consistent positioning and customizable layout. When inserted into any bag, it gives you the tactical ability to organize your mission critical gear on an interchangeable platform that can be swapped out or quickly reorganized as the mission changes.


    Product Specifications


    Width: 10.75" (273.05mm) 

    Height: 17" (431.8mm)

    Thickness: 0.188" (4.77mm)

    Material: High Strength Polyethylene 

    Weight: 10.75 ounces (354.369 grams)



    Backpack Compatibility


    The 10.75in x 17in RMP Backpack Insert fits:

    - 5.11 Tactical Rush 24 Main Compartment
    - 5.11 Tactical COVERT 18 Main Compartment
    - Evergoods CPL-24
    - GoRuck Rucker 20L Main Compartment
    - GoRuck GR1 21L Main Compartment
    - Hazard 4 Second Front Backpack Main Compartment
    - Maxpedition Riftcore
    - Mystery Ranch 3DAP/CL
    - Triple Aught Design TAD FAST Pack Lightspeed
    - Vertex EDC Ready Bag
    - Any bag with interior dimensions equal to or greater than 10.75in wide x 17in tall

     

    Securing RMP inside Backpack

    For Backpacks with Internal Webbing:

    Some backpacks have MOLLE webbing sewn inside. You can loop a velcro one wrap, Velcro Cinch Strap, Web Dominator, or Grimloc through the internal MOLLE webbing of the backpack and secure the panel to the pack using one of those methods.

    For backpacks with Internal Velcro Loop:

    - Purchase "Low Profile Hook - Adhesive Backed - 3/4" Width" from GMT. 

    - Ensure the panel is cleaned with an alcohol wipe and completely dry.

    - Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

    - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

    - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

      For any backpack without internal MOLLE webbing:

      Hydration Bladder Loop

      - Secure the panel at the top of the internal main pocket by using a hydration bladder loop if available. Use Velcro one wrap or Grimloc.

      Grommet / Chicago

      - Punch a hole in the fabric and secure a grommet to prevent ripping. Use a chicago screw to secure the panel to the grommet.

      Adhesive backed Velcro

      To adhere the Adhesive backed Velcro Hook tape to your RMP panel:

      - Ensure the panel is cleaned with an alcohol wipe and completely dry.

      - Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

      - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

      - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

        To adhere the Loop side adhesive backed velcro to the backpack:

        - Once Velcro Hook is adhered to the panel, stick the velcro loop onto that strip on the panel as well so it is perfectly lined up

        - Flip your backpack inside out so you get an unobstructed view of the interior back panel of the bag that the rigid molle panel will fit against

        - Peel the plastic off the adhesive backed velcro loop (leaving the velcro loop stuck in place on the RMP)

        - Line up the entire RMP where you want it in the backpack and stick it down in place. Press firmly to ensure Velcro Loop side has stuck to bag, and then peel the panel/velcro hook away from the bag, careful to leave the velcro loop in place inside the bag.

        - Press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. Apply heat from a hair dryer to warm up the bag and the velcro loop tape, enabling the adhesive to "run" or liquefy enough to seep into the bag fabric for a better bond.

         

        Attaching Holsters with Quick Detach Platforms


        Set Backer Plate into punch out from back of RMP panel at desired location.
        - Accessories with multiple backer plates may need the backer plates to be oriented properly for either vertical or horizontal mounting
        - Pass screws through Female Receiver Plate and into tapped hole of backer plate from the front side of the RMP panel, screw in to secure.
        - Screw the Male Plate onto the Holster.
        - If desired mount additional Female Receiver Plates onto a belt loop, MOLLE webbing of bag or vest elsewhere, separate RMP panel in a vehicle, storage case, safe door etc. Anywhere you mount additional Female Receiver Plates will allow you to quickly secure the piece of gear that has the Male Plate to that item. The same procedure can be used to attach any accessory that requires backer plates

         
         


        Attaching MOLLE Pouches


          
          
          
          

         

        Upgrading to accept Velcro Hook/Loop Pouches


        To upgrade any RMP to accept Hook backed pouches, morale patches, or accessories follow the below steps:
        To adhere the Adhesive backed Velcro Loop tape to your RMP panel:
        - Purchase "Low Profile Loop - Adhesive Backed - 1" Width" from GMT. 
        - Ensure the panel is cleaned with an alcohol wipe and completely dry.
        - Peel the backing off the adhesive backed velcro tape and place the loop section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.
        - Apply heat from a hair dryer to warm up the panel and the velcro, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.
        - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

        Shipping Notes
        • Free Standard Shipping on $100+ Orders to the USA.
        • Except Preorder products are shipped in 48 hours.
        • Delivery to the USA:
        1. Standard Shipping : 3-10 business days
        • If time is of the essence, please consider selecting expedited delivery for faster service.
        Exchange/Return Notes
        • We offer a 30-day return/exchange service after receiving.
        • Final sale items are not eligible for returns or exchanges.
        • To process your return/exchange, please contact us at [email protected]
        • Please click here for more details>>> Return & Exchange Policy
        SKU: 4121121804

        Discover Niche Categories That Outsell

        Top-Converting Item to Boost Your Average Order

        4.6 ★★★★★
        Based on 2128 reviews
        Sort
        Highest Rating
        Newest First
        Oldest First
        Product Reviews
        M
        Verified Purchase
        Maira G.
        Phoenix, US
        ★★★★★ 5
        Loved by both dogs!
        Color: Dark Gray, Size: Large - 36”L x 36”W x 8”Th, Color: Dark Gray, Size: Large - 36”L x 36”W x 8”Th
        My dogs love them! I wanted something light but comfortable for my dogs (who are extremely picky and don’t like to sit unless there is a cushion to sit on) as secondary beds to easily move around the house as needed. These are perfect and also super cute. I ordered one to test it and immediately ordered the second after the first one arrived. I have a 56 lb. And a 100 lb dog and they love to curl up inside and use the ‘pillow’ to support their head. I ordered the 36” but if your dog likes to sprawl out, I suggest getting the larger one for comparable sized dogs. The pictures are of my 56 lb. dog for reference.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on May 11, 2026
        K
        Verified Purchase
        Keith Newman
        Omaha, US
        ★★★★★ 5
        Are they using it??
        Color: Pink, Size: Medium - 30”L x 30”W x 8”Th
        I bought this bed for my cats, of which I have 4. The bed fits 2 cats at a time snuggly if they do not mind sharing. The size I bought is a medium. The bed is a “dog” bed but the cats love it more than any other bed. It is very soft to touch but provides a lot of support. Its depth seems perfect for cats. This bed is rarely unoccupied 😆. I just bought a second one before a riot starts!
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on May 21, 2026
        A
        Verified Purchase
        Amazon Customer
        Birmingham, US
        ★★★★★ 5
        Good buy✨
        Color: Black, Size: Medium - 30”L x 30”W x 8”Th, Color: Black, Size: Medium - 30”L x 30”W x 8”Th
        I ordered the medium to give my small dog space to play in his bed which he does!!! I laid on it with him watching a show so it had my scent and the bed did the rest💖💖💖 its very soft and comfortable My dog is an adult toy poodle under 10lbs the small bed would be fine for just resting.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on May 2, 2026
        K
        Verified Purchase
        Kindle Customer
        Draper, US
        ★★★★★ 5
        Tough toy
        Color: Wisconsin Badgers, Style: NCAA #1 Fan Toy
        Dogs haven't destroyed it so that's 5 stars in my house
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on December 23, 2025
        P
        Verified Purchase
        Patty Cates
        Waukegan, US
        ★★★★★ 5
        Best puppy toy!
        Color: Kentucky Wildcats, Style: NCAA #1 Fan Toy
        My grand puppy loves loves this hand. I buy 1 every year for her. It’s her favorite puppy toy!!
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on December 29, 2025

        recommand products